Menu
Vicera’s CST-sanding machine is designed especially for cross-linked polyethylene (XLPE) and rubber insulation sanding and polishing. It can used to smooth the transition of the insulation and semiconducting insulation screen as well. CST M can also be used for sanding other materials, such as metal pipes.
Vicera’s CST-sanding machine is designed especially for cross-linked polyethylene (XLPE) and rubber insulation sanding and polishing. It can used to smooth the transition of the insulation and semiconducting insulation screen as well (for the final insulation surface use always clean sanding belt). CST M can also be used for sanding other materials, such as metal pipes.
With CST sanding machine you can deliver the job 10 times faster than by hands with better surface smoothness. Tool is completely safe and less physically demanding when used in appropriate way.
CST sanding machine has 10 mm attachment shaft for the electric drills adjustable socket.
Sanding belts also available from Vicera. Belts are especially suitable for sanding MV and HV voltage cables with highest quality. If you need other grain sanding belts, please contact to info@vicera.fi.
Length 300 mm
Width 180 mm
Height 130 mm
Weight 0,985 kg
Max Cable Ø 80 mm
Product code: 64 136 12
Sanding belts:
CST M P240 20pcs/pkg 64 136 13
CST M P320 20pcs/pkg 64 136 14
CST M P400 20pcs/pkg 64 136 15
CST M P240 100pcs/pkg 64 136 16
CST M P320 100pcs/pkg 64 136 17
CST M P400 100pcs/pkg 64 136 18
CST M P180 20pcs/pkg 64 136 19
CST M P180 100pcs/pkg 64 136 20
Vicera’s APU2.0 cable joint stand was developed together with experienced cable jointers for the installations of MV and HV cable joints and terminations. With APU2.0 work is easier, more ergonomic, and efficient to deliver.
Patent pending.
Vicera’s APU2.0 cable joint stand was developed together with experienced cable jointers for the installations of MV and HV cable joints and terminations. With APU2.0 work is easier, more ergonomic, and efficient to deliver. Based on significant experiences and feedback from the field, jointers rely on this to achieve higher quality of installations.
Each cable clamp of the APU2.0 cable joint stand can be adjusted to its own desired position. Cable clamps have stepless adjustment in the lateral and tilt angle directions. Even if the cable comes from the ground vertically, it is possible to attach in APU2.0 cable clamp. The height adjustment is very wide. Cables can be attached to APU2.0 very close to the ground with an installation height of 20 cm and maximum height is 145 cm. Legs has as well multiple adjustment options and thus, it can be used in almost all kinds of joint bays. Legs can be adjusted in 180 degrees angle to place it on a cable trench. The clamps are designed to fit any MV and HV cable from 18 mm to 90 mm in outer diameter.
APU2.0 is a great “jointer mate” from the worst joint bay to the substation environment. It is used by several accessory manufacturers in trainings and demos as well!
Length 180 mm
Width 730 mm
Max height 1300 mm
Min height 300 mm
Weight 17 kg
Cable Ø 18-90 mm
Product code: 64 136 11
Patent Pending.
Aluminum stand for installation of medium voltage cables
Aluminum stand for installation of medium voltage cables.
The stand has extensive adjustment options. The ends have pins that prevent the cables from falling sideways. Stepless width adjustment. Height adjustment with cotter pins. The legs of the stand can be placed in the transport position, so it can fit in a small space. Weighs less than 3 kg and has a load capacity of more than 90 kg.
The height of the horizontal tube can be adjusted between 75 and 640 mm
The width is adjustable between 510 and 770 mm.
Length 770 mm
Width 510 mm
Height 640 mm
Weight 2,8 kg
Load capacity +90kg
Product code: 64 136 21
A good knife for general use by electrical and network installers.
A high-quality and multipurpose knife for electrical and network installers. The knife is a folding model, so the blade stays good and the knife fits well in the pocket. Durable and sharp blade that is lockable. Nicely shaped handle.
Width 50 mm
Length 110 mm
Height 20 mm
Weight 0,05 kg
Product code: 64 136 10
No datasheet available
Sheath spreader for twisting the outer sheath of high-voltage cables out of place.
Sheath spreader for twisting the outer sheath of high-voltage cables out of place. The weight of the sheat spreader is just right to handle, and there is enough lever arm for twisting. The sheath spreader has a comfortable rubber handle.
We recommend two sheath spreaders for working.
Width 145 mm
Length 430 mm
Height 25 mm
Weight 0,75 kg
Product code: 64 136 09
No datasheet available
Cable pliers for moving and handling heavy cables.
Cable pliers for moving and handling heavy cables. With these, you can move heavy high-voltage cables on the ground while standing with your back straight and without tangling your hands.
Width 350 mm
Length 850 mm
Height 50 mm
Weight 3,7 kg
Max cable Ø 125 mm
Product code: 64 136 06